Are you frustrated with a stripped screw on your iPhone? Don’t worry, as a phone repair technician, I have encountered this problem countless times. Removing a stripped screw from an iPhone can be challenging, and you need to be careful not to damage the phone’s internal components. This article will guide you on how to remove a stripped screw from an iPhone using different methods.
Video Tutorial:
What’s Needed
Before we move to the methods you can use to remove a stripped screw, here are some things you will need to have:
- A precision screwdriver set
- A rubber band
- A plier
- A small drill bit
- A Dremel tool
- Patience
Method 1: Try a Different Screwdriver
Trying a different screwdriver is the easiest way to remove a stripped screw from an iPhone. You may have been using the wrong screwdriver size, or the one you have may be damaged. Make sure you have the correct size of the screwdriver and insert it into the stripped screw head. Apply gentle pressure and turn it to the left to see if it will turn. If it doesn’t, try the other methods.
Q: Can I just use any screwdriver?
A: No. You need to ensure that you use the right size of the screwdriver. Using the wrong size may not fit the screw head properly and damage it.
Method 2: Use a Rubber Band
Using a rubber band is a great hack to remove a stripped screw from an iPhone. The rubber band provides extra grip to the screw head with the screwdriver, making it easier to turn. Here are the steps:
1. Place the rubber band over the stripped screw head.
2. Insert the screwdriver into the stripped screw head.
3. Apply gentle pressure and turn it to the left.
If the screwdriver still slips out, try using pliers to grip the screwdriver and turn it gently to the left.
Q: Can I use any type of rubber band?
A: Yes. Any rubber band will work for this method.
Method 3: Drill Out the Screw
Drilling out the screw should only be done if the previous methods have failed because it can damage the phone’s internal components. Here are the steps:
1. Get a small drill bit and drill a hole into the center of the stripped screw head. Be careful not to drill too deep into the phone.
2. Change to a larger drill bit and drill around the screw head until it falls off.
3. Use pliers to remove any remaining bits of the screw.
Q: Can I drill too deep into the phone?
A: Yes. You need to be careful not to drill too deep into the phone because it can damage the internal components.
Why can’t I Remove A Stripped Screw from iPhone?
There are several reasons why you can’t remove a stripped screw from an iPhone, such as:
- Using the wrong size of the screwdriver
- Applying too much pressure when tightening the screw
- Using a damaged screwdriver
- Worn out or damaged screw head
Here are some fixes:
- Use the right size of the screwdriver
- Apply gentle pressure when turning the screw
- Replace the damaged screwdriver
- Try using a rubber band or drilling out the screw
Suggestions
Here are some suggestions to keep in mind when trying to remove a stripped screw from an iPhone:
- Be patient and take your time
- Use the right size of the screwdriver
- Apply gentle pressure when turning the screw
- Try different methods until the screw comes out
- Be careful not to damage the phone’s internal components
5 FAQs
Q: Is it safe to remove a stripped screw from an iPhone?
A: Yes. It is safe to remove a stripped screw as long as you follow the right procedures and don’t damage the phone’s internal components.
Q: Can I use pliers to remove a stripped screw?
A: Yes. You can use pliers to grip the screwdriver and apply extra pressure to turn the screw.
Q: Can I use super glue to remove a stripped screw?
A: No. Using super glue is not recommended because you may end up gluing the screw to the phone, making it harder to remove.
Q: Do I need to remove a stripped screw to replace the iPhone screen?
A: It depends on the model of your iPhone. Some iPhone models require you to remove the stripped screw to replace the screen.
Q: Can a stripped screw be prevented?
A: Yes. You can prevent a stripped screw by using the right size of the screwdriver, applying gentle pressure when tightening the screw, and not over-tightening it.
