If you have forgotten your AirPods Pro device on your iPhone, don’t worry; you can easily reconnect them.
Here is what you need to do:
1. Open the Settings app on your iPhone and tap on Bluetooth.
2. Locate AirPods Pro in the list of available devices.
3. Tap the "i" icon next to AirPods Pro.
4. Tap Forget This Device.
5. Confirm that you want to forget the device.
6. Put your AirPods Pro in the charging case and close the lid. Wait for 30 seconds.
7. Open the lid and press and hold the button on the back of the charging case until the LED light on the front flashes white.
8. On your iPhone, tap Connect when the AirPods Pro prompt appears.
Your AirPods Pro should now be connected to your iPhone.
Video Tutorial:How do I pair my AirPods Pro with my iPhone after I forgot my device?
How do I Connect my AirPods Pro back to my iPhone?
To connect your AirPods Pro back to your iPhone, follow these steps:
1. Make sure your AirPods are charged and in their case.
2. Open the lid of your AirPods case.
3. On your iPhone, go to Settings > Bluetooth and make sure Bluetooth is turned on.
4. Find your AirPods in the list of available devices and tap on them.
5. Wait for your AirPods to connect. You should see a message on your iPhone confirming the connection.
Once your AirPods are connected, you should be able to listen to audio from your iPhone through them. If you’re having trouble connecting your AirPods, try resetting them by holding down the button on the back of the case until the LED light starts flashing. Then try the steps above again.
Can you reset AirPods without forgetting device?
Yes, you can reset your AirPods without forgetting the device. To do this, you need to access the Bluetooth settings on your device, and then locate your AirPods. Select the "i" button next to your AirPods, and then select "Forget This Device". This will reset your AirPods to their factory settings, but they will remain paired with your device. Once this is done, you can set up your AirPods again by putting them in their case and holding down the button on the back of the case until the LED light flashes white. Finally, re-pair your AirPods with your device via Bluetooth settings.
How do I reset my AirPods Pro from previous owner?
To reset your AirPods Pro from the previous owner, you will need to follow these steps:
1. Ensure that your AirPods Pro are disconnected from any device.
2. Place both AirPods Pro into the charging case and keep the lid open.
3. Press and hold the button on the back of the charging case for about 15 seconds until the LED light on the front flashes amber.
4. Release the button.
5. The AirPods Pro are now reset and ready to be set up to a new device.
It is important to note that resetting your AirPods Pro will remove all the previous owner’s information and personal settings from the device. After the reset, you can set up your AirPods Pro with your iPhone or any other compatible device as you would with any new pair.
Why are my AirPods not connecting to my iPhone after I forget a device?
There could be several reasons why your AirPods are not connecting to your iPhone after forgetting a device. One of the possibilities could be that your AirPods need to be reset. To do this, place them in their case, then press and hold the button on the back of the case until the status light flashes white. Another possibility could be an issue with your iPhone’s Bluetooth settings. Try restarting your iPhone or toggling the Bluetooth off and on again. Additionally, make sure your AirPods are charged and in close proximity to your iPhone. If the problem persists, it may be helpful to contact Apple support or take your devices to an authorized service provider for assistance.
How do I reconnect after forgetting my device?
Forgetting your device can be frustrating, but reconnecting it is not difficult. To reconnect your device, you need to go to the settings section of your phone and enable Bluetooth. Once you have enabled Bluetooth, turn on your device and put it in pairing mode. Your phone will detect the device and prompt you to connect to it. Follow the prompts to complete the pairing process. If your device is not detected, make sure that it is within close proximity to your phone and that Bluetooth is turned on. Once the pairing is complete, you can start using your device again. If you continue to experience issues with reconnecting your device, try resetting your device or contacting the manufacturer for further assistance.
How do I manually Connect my AirPods to my iPhone?
To manually connect your AirPods to your iPhone, follow these steps:
1. Ensure that your AirPods are charged and turned on.
2. Open the lid of your AirPods case and bring the AirPods close to your iPhone.
3. On your iPhone, go to the Control Center by swiping down from the top-right corner of the screen.
4. Tap on the "Bluetooth" icon to enable Bluetooth.
5. Your AirPods should appear in the list of available devices. Tap on them to connect.
6. If prompted, enter the passcode for your AirPods (usually 0000).
7. Once connected, you should be able to listen to audio through your AirPods.
